Du Søgte efter: Væskebehandlingsfiltre

Liquid process filters are used to separate particles and fluid in a suspension. When selecting a filter, it is important to select the proper filter type to ensure the filter meets the needs and requirements of the system. Filters can come in three basic varieties, namely cartridge filters, clean-in-place filters, and bag filters. Large surface areas in some models prevent pump cavitation, while stainless steel and polymer versions offer chemical compatibility.

Liquid process filters are used to separate particles and fluid in a suspension. When selecting a filter, it is important to select the proper filter type to ensure the filter meets the needs and requirements of the system. Filters can come in three basic varieties, namely cartridge filters, clean-in-place filters, and bag filters. Large surface areas in some models prevent pump cavitation, while stainless steel and polymer versions offer chemical compatibility.


27  results were found

SearchResultCount:"27"

Sort Results

Listevisning Easy View (new)

Tilfreds med din søgning? - rate den her.

Leverandør: Avantor
Beskrivelse: These filters are made from 100% PEEK.

Leverandør: Avantor
Beskrivelse: These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Ny og forbedret lagerstatus

Har du bemærket vores nye forbedrede synlighed på lagerlokationer under checkout?

Få mere at vide

Forbedret synlighed på lagerlokation

Varenummer: (590-0201)
Leverandør: Bohlender
Beskrivelse: Filter candle made of porous PE.
UOM: 1 * 10 Items


Leverandør: Avantor
Beskrivelse: The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Varenummer: (ROBU80052)
Leverandør: ROBU GLASFILTER
Beskrivelse: This solvent filter is made of pure borosilicate glass.
UOM: 1 * 1 Items


Leverandør: Bohlender
Beskrivelse: These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Leverandør: ROBU GLASFILTER
Beskrivelse: These filters are suitable for degassing and filtration of solvents e.g. in chromatography.

Varenummer: (590-0221)
Leverandør: Bohlender
Beskrivelse: Suction Filter with PTFE membrane.
UOM: 1 * 5 Items


Leverandør: IDEX RHEODYNE
Beskrivelse: Inlet filters are used to extract particles from the sample between the injector and the column.

Varenummer: (VIVAH2O-CUF)
Leverandør: Sartorius
Beskrivelse: The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.
UOM: 1 * 1 Items


Varenummer: (MICS58846-05)
Leverandør: MICROSOLV
Beskrivelse: Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.
UOM: 1 * 1 Items


Leverandør: PerkinElmer
Beskrivelse: Solvent reservoir sparger, Titan, Porestørrelse: 10 µm

Varenummer: (REST25008)
Leverandør: Restek
Beskrivelse: This slip-on inlet filter is made of 316 stainless steel tip with a tefzel collar seals to a corrosion-resistant 316 stainless steel filter element.
UOM: 1 * 1 Items


Varenummer: (REST26431)
Leverandør: Restek
Beskrivelse: This solvent filter is made up of borosilicate glass and is used to prevent the particulates and microbial growth in the solvents from entering the system.
UOM: 1 * 1 Items


Leverandør: Restek
Beskrivelse: A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to ¹/₈" Ext.Ø PTFE tubing when finger tightened onto the precision-machined filter holder.

Varenummer: (REST26024)
Leverandør: Restek
Beskrivelse: Flow filters are designed to improve flow when filtering oil and grease samples. These filters can be used with Resprep® Diskcover-47 reservoir or any 47 mm glass sample reservoir.
UOM: 1 * 20 Items


Ring og spørg om pris
Lager for denne post er begrænset, men kan være til rådighed på et lager tæt på dig. Sørg for, at du er logget ind på webstedet, så tilgængelige bestand kan vises. Hvis call vises stadig, og du har brug for hjælp, bedes du ringe til os på - 43 86 87 88.
Lager for denne post er begrænset, men kan være til rådighed på et lager tæt på dig. Sørg for, at du er logget ind på webstedet, så tilgængelige bestand kan vises. Hvis call vises stadig, og du har brug for hjælp, bedes du ringe til os på - 43 86 87 88.
Dette produkt er mærket som begrænset og kan kun købes af godkendte Shipping konti. Hvis du har brug for yderligere hjælp, e-mail VWR Regulatory Department på Regulatory_Affairs@vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dette produkt er blevet blokeret for salg via hjemmesiden. Kontakt kundeservice for mere information.
Det originale produkt er ikke længere tilgængelig. Den viste erstatning er tilgængelig.
Produkt (er) markeret med dette symbol er udgået - sælges indtil lageret er tomt. Alternativer kan være tilgængelige ved at søge med VWR-katalognummeret ovenfor. Hvis du har brug for yderligere hjælp, bedes du kontakte kundeservice på telefon 4386 8788
1 - 16 of 27
no targeter for Bottom