Du Søgte efter: Vakuumfælder

Placing vacuum traps between an apparatus and vacuum source establishes a safe and controlled working system. The glassware protects the pump from the separated solvents while simultaneously preventing vapours from being emitted back into the system. Vacuum traps in reservoir, one piece, or two piece styles also guarantee that personnel will not be exposed to gases produced that could be harmful. Standard sized inlet and outlet stems can snugly fit regular stoppers.

Placing vacuum traps between an apparatus and vacuum source establishes a safe and controlled working system. The glassware protects the pump from the separated solvents while simultaneously preventing vapours from being emitted back into the system. Vacuum traps in reservoir, one piece, or two piece styles also guarantee that personnel will not be exposed to gases produced that could be harmful. Standard sized inlet and outlet stems can snugly fit regular stoppers.


24  results were found

SearchResultCount:"24"

Sort Results

Listevisning Easy View (new)

Tilfreds med din søgning? - rate den her.

Leverandør: KIMA SAS DI CHIARIN RENZO
Beskrivelse: ESA 1 single use holder, PP

Varenummer: (HUBE3045.0003.98)
Leverandør: HUBER
Beskrivelse: The CT50 Single OLÉ cold trap means that evaporation tasks in the laboratory are now even easier and cheaper. It has been specially developed to offer highly efficient solvent recovery in laboratory conditions.
UOM: 1 * 1 Items

New Product


Leverandør: Restek
Beskrivelse: These replacement chemical traps and parts for Agilent GC are easy to install, attach to same fittings as original manufacturer's equipment.

Varenummer: (WITGDH.WCT00140)
Leverandør: witeg Labortechnik
Beskrivelse: Ideal for collecting evaporation vapor or hazardous vapor from vacuum line.
UOM: 1 * 1 Items

New Product


Varenummer: (201-3052)
Leverandør: SciLabware
Beskrivelse: Designed for the vacuum systems which prevents the vapours from the volatile materials from damaging pumps and easy to use.
UOM: 1 * 1 Items


Leverandør: VARIAN
Beskrivelse: Though highly stabilised, it is impossible to guarantee that no particles will dislodge from the column wall. When used in valve-switching applications, the use of a particle trap can prevent scarring of the rotors.

Varenummer: (VARIA584)
Leverandør: VARIAN
Beskrivelse: This vacuum trap eliminates the possibility of drawing fluids into the vacuum pump that may be detrimental to it.
UOM: 1 * 1 Items


Leverandør: EDWARDS HIGH VACUUM METTLER
Beskrivelse: Inlet Desiccant Trap IDT20K: Use when pumping limited quantities of water vapour at high pumpings speeds to a low vapour pressure.

Ring og spørg om pris
Lager for denne post er begrænset, men kan være til rådighed på et lager tæt på dig. Sørg for, at du er logget ind på webstedet, så tilgængelige bestand kan vises. Hvis call vises stadig, og du har brug for hjælp, bedes du ringe til os på - 43 86 87 88.
Lager for denne post er begrænset, men kan være til rådighed på et lager tæt på dig. Sørg for, at du er logget ind på webstedet, så tilgængelige bestand kan vises. Hvis call vises stadig, og du har brug for hjælp, bedes du ringe til os på - 43 86 87 88.
Dette produkt er mærket som begrænset og kan kun købes af godkendte Shipping konti. Hvis du har brug for yderligere hjælp, e-mail VWR Regulatory Department på Regulatory_Affairs@vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
Dette produkt er blevet blokeret for salg via hjemmesiden. Kontakt kundeservice for mere information.
Det originale produkt er ikke længere tilgængelig. Den viste erstatning er tilgængelig.
Produkt (er) markeret med dette symbol er udgået - sælges indtil lageret er tomt. Alternativer kan være tilgængelige ved at søge med VWR-katalognummeret ovenfor. Hvis du har brug for yderligere hjælp, bedes du kontakte kundeservice på telefon 4386 8788
17 - 24 of 24
no targeter for Bottom